QIDI TECH X-Max 3 3D Printer, Auto Levelling, 600mm/s Printing Speed, Flexible HF Board, Chamber Circulation Fan, Filament Detection, 64-bit Processor, CoreXY Structure, All-metal Frame, 325x325x315mm

Highlights

QIDI TECH X-Max 3 3D Printer Main Features

QIDI Tech X-Max 3 3D printer is based on Klipper, capable of printing at a maximum speed of  600mm/s with 20000mm/s² printing acceleration and 35mm³/s extruder flow. Apart from the Klipper firmware, the printer also features a high-speed extruder and a CoreXY structure, making it, therefore, the best high-speed FDM printer of the industrial-grade lineup.

• High-speed industrial-grade FDM machine
• Print speed up to 600 mm/s
• Heated build chamber
• High-speed extruder with a max temperature of 350 °C
• Automatic bed leveling
• Faster Speed 600mm/s
• 325*325*315 mm
• High-Flow 35mm³/s
• Acceleration: 20000mm/s²

QIDI TECH X-Max 3 3D printer comes with:

• Two hotends (Copper alloy nozzle hotend & Hardened steel nozzle hotend)
• Dryer box
• Spool of filament
• All the necessary tools

New All-metal Frame

The all-metal frame is ultra-stable, reinforced with metal crossbeams at the bottom, and resistant to deformation.

High-grade Hardness Steel Linear Hollow Optical Axis

Improved surface straightness, and a 60% lower error deflection. Highly durable and has no need for frequent maintenance.

CoreXY Structure

With TMC2209 silent drive and CoreXY structure, this 3D printer can reduce motion Inertia and improve the motion speed, offering a low-noise printing experience.

High-Speed Extruder with Cooling System

The extruder with a 9.5:1 transmission ratio is steadier, stronger, and faster. The new cooling system can reduce the risk of clogs and ensure smooth extrusion.

Two Sets of Hot End

Copper alloy nozzle for better thermal conductivity, smooth printing and to be more durable. Hardened steel nozzle for abrasive materials, and long-term usage. While both have a max print temp of 350 Celsius.

Temperature Controlled Chamber and Drying Box

With an independent heating device that has a maximum temp of 65 Celsius, QIDI X-Max 3 3D printer can high-efficiency print PET-CF, PAHT-CF, etc. It also has a chamber circulation fan with an activated carbon air filter.

No Layer Separation

The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensures that the part is built uniformly without the generation of internal stresses.

Automatic Levelling

Klipper adaptive meshing and purging, fast ensure flawless first layer for every 3D print.

Flexible HF Board

The double-sided flexible magnetic HF plate has excellent adhesion, no warping trouble, and is easy to remove the prints.

Excellent User Experience

The highly acclaimed QIDI slicer software has both normal mode and expert mode, which is also easy for beginners to get started. It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.

Specification